5.2.4

Topic 18

Half-life

  • IGCSE Physics 0625
  • 3 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Define the half-life of a particular isotope as the time taken for half the nuclei of that isotope in any sample to decay; recall and use this definition in simple calculations, which might involve information in tables or decay curves (calculations will not include background radiation)

Supplement

  1. 2

    Calculate half-life from data or decay curves from which background radiation has not been subtracted

  2. 3

    Explain how the type of radiation emitted and the half-life of an isotope determine which isotope is used for applications including:

    • ahousehold fire (smoke) alarms
    • birradiating food to kill bacteria
    • csterilisation of equipment using gamma rays
    • dmeasuring and controlling thicknesses of materials with the choice of radiations used linked to penetration and absorption
    • ediagnosis and treatment of cancer using gamma rays

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 5.2.4 Half-life (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Half-life

half-life Syllabus definition

The time taken for half the nuclei of that isotope in any sample to decay.

Fig. 1Finding half-life from a decay curve.

Each isotope has its own half-life, from fractions of a second to billions of years. Because the activity (count rate) is proportional to the number of undecayed nuclei, the count rate also halves every half-life.

Worked example

Half-life calculation

A sample contains 6400 undecayed nuclei of an isotope with a half-life of 8 days. How many are left after 24 days?

  1. 1

    Number of half-lives.

  2. 2

    Halve three times.

Answer800 nuclei

Worked example

Finding half-life from a table

The count rate of a source falls from 480 counts/minute to 60 counts/minute in 45 minutes. Find the half-life.

  1. 1

    480 → 240 → 120 → 60 is 3 halvings.

    3 half-lives = 45 minutes

  2. 2

    Divide.

    minutes

Answer15 minutes

2Half-life with background radiation (Supplement)

If the data still include background radiation, the count rate does not fall to zero but levels off at the background rate. Subtract the background count rate from every reading first, then find the time for the corrected count rate to halve.

Worked example

Correcting first

(Supplement) Background = 20 counts/minute. Readings: 0 min, 420; 10 min, 220; 20 min, 120 counts/minute. Find the half-life.

  1. 1

    Corrected rates.

    400, 200, 100 counts/minute

  2. 2

    Halves every 10 minutes.

    half-life = 10 minutes

Answer10 minutes

3Choosing an isotope for a job (Supplement)

ApplicationRadiationHalf-lifeReason
smoke alarm (americium-241)αlong (hundreds of years)α ionises air between plates; smoke absorbs α, so the current drops and the alarm sounds; α is stopped by the case; long half-life – no replacement needed
irradiating food to kill bacteriaγlongγ penetrates packaging and food; food does not become radioactive
sterilising medical equipmentγlongγ penetrates the sealed packaging and kills microorganisms
measuring / controlling thickness of paper or foilβlongβ is partly absorbed – the amount depends on thickness (α would all be stopped, γ would all pass)
diagnosis (tracers) and treatment of cancerγshort for tracers (hours); long for external treatment sourcesγ passes out of the body to a detector, or targets a tumour from several directions; short half-life gives a small dose
Fig. 2Thickness control with β.

Thickness control: if the sheet gets thicker, fewer β-particles reach the detector; the falling count rate makes the rollers press harder. A long half-life means the count rate does not fall noticeably over time, so changes are due only to thickness.

4Exam focus

Key words: half-life; half the nuclei decay; count rate halves; decay curve; subtract background; α smoke alarm; γ sterilising and cancer; β thickness; long or short half-life.

Quick self-check

Answer in your head first, then reveal.

  1. The time taken for half the nuclei of that isotope in a sample to decay (1).

  2. 1/8 (1).

  3. 100 counts per minute (1).

  4. Beta is partly absorbed by paper (1); amount absorbed changes with thickness (1); alpha would be fully absorbed / gamma would pass through unchanged (1).

  5. Activity falls quickly / small dose to the patient (1); but long enough to complete the scan (1).

Finished this subtopic? Track it on your subject page.