4.5.2

Topic 17

The a.c. generator

  • IGCSE Physics 0625
  • 1 min read
  • Syllabus 2026, 2027 and 2028

Supplement

  1. 1

    Describe a simple form of a.c. generator (rotating coil or rotating magnet) and the use of slip rings and brushes where needed

  2. 2

    Sketch and interpret graphs of e.m.f. against time for simple a.c. generators and relate the position of the generator coil to the peaks, troughs and zeros of the e.m.f.

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 4.5.2 The a.c. generator (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1How a simple a.c. generator works (Supplement)

Fig. 1Rotating-coil generator.
  • A rectangular coil is turned between the poles of a magnet. Its sides cut through the field lines, so an e.m.f. is induced.
  • Each side moves up through the field and then down, so the induced e.m.f. reverses every half turn – it is alternating.
  • Each end of the coil is connected to a slip ring; carbon brushes press on the rings and carry the current to the external circuit.
  • In a rotating-magnet generator (e.g. a bicycle dynamo, power station alternators) the magnet turns inside fixed coils, so no slip rings are needed.

2The e.m.f.–time graph

Coil positione.m.f.Why
plane of coil parallel to the fieldmaximum (peak or trough)sides cut the field lines at the greatest rate
plane of coil perpendicular to the fieldzerosides move along the field lines, not cutting them

One complete turn gives one complete cycle of the sine-shaped graph. Turning the coil faster increases both the peak e.m.f. and the frequency.

3Exam focus

Key words: rotating coil; slip rings; brushes; alternating e.m.f.; maximum when coil parallel to field; zero when perpendicular.

Quick self-check

Answer in your head first, then reveal.

  1. Connect the rotating coil to the external circuit (1); without the wires twisting (1).

  2. Coil perpendicular to the field (1); sides not cutting field lines (1).

  3. Higher peaks (1); more cycles per second / higher frequency (1).

Finished this subtopic? Track it on your subject page.