2.3.1

Topic 9

Conduction

  • IGCSE Physics 0625
  • 2 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Describe experiments to demonstrate the properties of good thermal conductors and bad thermal conductors (thermal insulators)

Supplement

  1. 2

    Describe thermal conduction in all solids in terms of atomic or molecular lattice vibrations and also in terms of the movement of free (delocalised) electrons in metallic conductors

  2. 3

    Describe, in terms of particles, why thermal conduction is bad in gases and most liquids

  3. 4

    Know that there are many solids that conduct thermal energy better than thermal insulators but do so less well than good thermal conductors

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 2.3.1 Conduction (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Good and bad conductors

Thermal conduction is the transfer of thermal energy through a material without the material itself moving. Metals are good thermal conductors; non-metals such as plastic, wood, glass and air are bad conductors (thermal insulators).

Fig. 1An experiment to compare conductors.

Practical

Comparing thermal conductors

Aim. To compare how well different materials conduct thermal energy.

Method

  1. Fix small pins with wax at equal distances along rods of the same length and thickness made of different materials.
  2. Heat one end of each rod equally (e.g. with the rods arranged around one flame, or dipped in hot water).
  3. Time how long it takes for the pins to drop, or note how far along each rod the wax melts.
independent variablematerial
dependent variabletime for wax to melt / distance
controlled variablerod length and thickness; heating

Results. Pins fall soonest and furthest along the best conductor (copper), then aluminium and iron; glass conducts very little.

Safety. Hot rods – use heat-proof mats and do not touch.

Another demonstration: heat water at the top of a test tube with ice weighted at the bottom – the water boils but the ice does not melt, showing that water is a poor conductor.

2Explaining conduction (Supplement)

  • All solids – lattice vibrations: particles at the hot end vibrate more strongly and pass energy to their neighbours, which pass it on along the lattice. This is slow.
  • Metals – free electrons: metals also contain free (delocalised) electrons. At the hot end they gain kinetic energy, move quickly through the metal and collide with particles far away, transferring energy rapidly. This is why metals are good conductors.
  • Gases and most liquids: the particles are far apart (gases) or not in a lattice, so collisions that pass on energy are rare – conduction is bad.
  • Many solids (e.g. brick, concrete, glass) conduct better than insulators such as foam or air but less well than metals.

3Exam focus

Key words: good conductor; insulator; lattice vibrations; free (delocalised) electrons; particles far apart.

Quick self-check

Answer in your head first, then reveal.

  1. Rods of same size with wax / pins along them (1); heat one end of each equally (1); wax melts / pins fall sooner on copper (1).

  2. Free / delocalised electrons (1); gain energy and move quickly through the metal, transferring energy (1).

  3. Particles are far apart (1); few collisions to pass on energy (1).

Finished this subtopic? Track it on your subject page.