Detailed · Deep study
1Demonstrating the force
Practical
Force on a current-carrying conductor
Aim. To show that a force acts on a wire carrying a current in a magnetic field.
Method
- Place a horizontal copper rod across two parallel metal rails between the poles of a strong U-shaped magnet.
- Connect the rails to a low-voltage d.c. supply and switch on.
- Observe the rod; then reverse the current; then turn the magnet round to reverse the field.
Results. The rod rolls along the rails. Reversing either the current or the field reverses the direction of the force (and the motion); reversing both leaves it unchanged.
Safety. Low voltage only; the rod may get hot.
2Directions (Supplement)
The force, the magnetic field and the current are at right angles to each other. Fleming's left-hand rule: hold the thumb and first two fingers of the left hand at right angles: First finger = Field (N to S), seCond finger = Current (conventional, + to −), thuMb = Motion (force).
Beams of charged particles (e.g. electrons in a vacuum tube) are deflected by a magnetic field in the same way. For a positive beam, use the beam direction as the current; for an electron beam, the current is in the opposite direction to the electrons' motion.
3Exam focus
Key words: force on a current-carrying conductor; reversing current or field reverses the force; Fleming's left-hand rule; beams of charged particles.
Quick self-check
Answer in your head first, then reveal.
Reverse the current (1); reverse the magnetic field (1).
Downwards (by the left-hand rule) (1).
Conventional current is right to left (1); left-hand rule gives a force downwards (1).
