Detailed · Deep study
1Pressure
force per unit area
Pressure is measured in pascals (Pa): 1 Pa = 1 N/m². Areas may be given in cm²: 1 m² = 10 000 cm².
Worked example
Pressure under a block
A box of weight 600 N rests on a base of area 0.20 m². Calculate the pressure on the floor.
- 1
Apply p = F/A.
Answer3000 Pa
| Example | Area | Effect |
|---|---|---|
| sharp knife, drawing pin, stiletto heel | very small | large pressure: cuts or sinks in |
| snowshoes, wide tractor tyres, camel's feet | large | small pressure: does not sink into soft ground |
| foundations of a building | large | spreads the weight so the building does not sink |
2Pressure in liquids
- Pressure in a liquid increases with depth – the deeper you go, the greater the weight of liquid above.
- At the same depth, pressure is greater in a denser liquid.
- Pressure at a given depth acts equally in all directions.
- Examples: dams are thicker at the bottom; divers feel greater pressure the deeper they go; water tanks are placed high to give a greater pressure in the pipes.
Calculating pressure change (Supplement)
Worked example
Pressure on a diver
Find the extra pressure on a diver 25 m below the surface of sea water (density 1030 kg/m³, g = 9.8 N/kg).
- 1
Apply Δp = ρgΔh.
Answerabout 2.5 × 10⁵ Pa (in addition to atmospheric pressure)
3Exam focus
Key words: force per unit area; pascal; smaller area, larger pressure; increases with depth; increases with density; Δp = ρgΔh.
Quick self-check
Answer in your head first, then reveal.
Force per unit area (1).
700 ÷ 0.014 (1) = 50 000 Pa (1).
Pressure in water increases with depth (1); so the force on the bottom of the dam is greater (1).
800 × 9.8 × 0.50 (1) = 3900 Pa (1).
