Detailed · Deep study
1Drawing circuit diagrams
- Use a ruler; draw wires as straight lines with right-angled corners.
- Draw junctions where wires join as dots.
- Do not leave gaps in wires except at an open switch.
- Ammeters go in series; voltmeters go in parallel.
2How components behave
| Component | Behaviour in a circuit |
|---|---|
| cell / battery / power supply | provides the e.m.f.; long line of the cell is the positive terminal |
| switch | open: no current; closed: current flows |
| fixed resistor | limits the current; constant resistance |
| variable resistor | resistance can be changed to control the current |
| potential divider | gives a variable output p.d. from a sliding contact |
| heater / lamp | transfers energy as thermal energy / light |
| thermistor (NTC) | resistance decreases as temperature increases |
| light-dependent resistor (LDR) | resistance decreases as light intensity increases |
| motor, bell | transfer energy to kinetic energy / sound |
| ammeter / voltmeter | measure current (in series) / p.d. (in parallel) |
| magnetising coil | produces a magnetic field when current flows |
| transformer | changes an alternating p.d. |
| fuse | melts and breaks the circuit if the current is too large |
| relay | a small current in its coil switches a separate circuit on or off |
| diode (S) | lets current flow in one direction only |
| LED (S) | a diode that emits light when current flows through it in the forward direction |
3Exam focus
Key words: symbols; series; parallel; thermistor resistance falls when hotter; LDR resistance falls in brighter light; fuse; relay; diode one way (S).
Quick self-check
Answer in your head first, then reveal.
Rectangle in a circle with two arrows pointing towards it (1).
It decreases (1).
To melt and break the circuit if the current is too large (1).
Allows current in one direction only (1).
