4.3.2

Topic 16

Series and parallel circuits

  • IGCSE Physics 0625
  • 2 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Know that the current at every point in a series circuit is the same

  2. 2

    Know how to construct and use series and parallel circuits

  3. 3

    Calculate the combined e.m.f. of several sources in series

  4. 4

    Calculate the combined resistance of two or more resistors in series

  5. 5

    State that, for a parallel circuit, the current from the source is larger than the current in each branch

  6. 6

    State that the combined resistance of two resistors in parallel is less than that of either resistor by itself

  7. 7

    State the advantages of connecting lamps in parallel in a lighting circuit

Supplement

  1. 8

    Recall and use in calculations, the fact that:

    • athe sum of the currents entering a junction in a parallel circuit is equal to the sum of the currents that leave the junction
    • bthe total p.d. across the components in a series circuit is equal to the sum of the individual p.d.s across each component
    • cthe p.d. across an arrangement of parallel resistances is the same as the p.d. across one branch in the arrangement of the parallel resistances
  2. 9

    Explain that the sum of the currents into a junction is the same as the sum of the currents out of the junction

  3. 10

    Calculate the combined resistance of two resistors in parallel

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 4.3.2 Series and parallel circuits (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Series circuits

Fig. 1Series (left) and parallel (right).
  • The current is the same at every point in a series circuit.
  • The combined e.m.f. of cells in series is the sum of their e.m.f.s (if they all point the same way): three 1.5 V cells give 4.5 V.
  • The combined resistance of resistors in series is the sum:

Worked example

Series circuit

A 6.0 V battery is connected to a 4.0 Ω and an 8.0 Ω resistor in series. Find the current.

  1. 1

    Total resistance.

  2. 2

    I = V ÷ R.

Answer0.50 A

2Parallel circuits

  • The current from the source is larger than the current in each branch.
  • The combined resistance of two resistors in parallel is less than that of either resistor by itself – adding a branch gives the current another path.

Advantages of parallel lighting circuits: each lamp has the full supply p.d. (so it is fully bright); lamps can be switched on and off independently; if one lamp fails, the others still work.

3Calculations (Supplement)

  • At a junction, the sum of the currents entering = the sum of the currents leaving. Charge is conserved: it cannot pile up or disappear at a junction.
  • In series, the total p.d. across the components = the sum of the individual p.d.s.
  • In parallel, the p.d. across each branch is the same as the p.d. across the whole arrangement.

Worked example

Parallel resistors

(Supplement) Find the combined resistance of 6.0 Ω and 3.0 Ω in parallel, and the current from a 6.0 V cell connected across them.

  1. 1

    1/R = 1/6 + 1/3.

  2. 2

    I = V ÷ R.

    (2.0 A + 1.0 A in the branches)

Answer2.0 Ω; 3.0 A

4Exam focus

Key words: same current in series; e.m.f.s add; R = R₁ + R₂; parallel – larger total current, smaller combined resistance; junction rule; p.d.s add in series; same p.d. in parallel.

Quick self-check

Answer in your head first, then reveal.

  1. 30 Ω (1).

  2. Each has full mains p.d. / full brightness (1); can be switched independently / others stay on if one fails (1).

  3. 1.1 − 0.3 = 0.8 A (1).

  4. 1/R = 1/10 + 1/10 (1); R = 5.0 Ω (1).

Finished this subtopic? Track it on your subject page.