Detailed · Deep study
1How a simple a.c. generator works (Supplement)
- A rectangular coil is turned between the poles of a magnet. Its sides cut through the field lines, so an e.m.f. is induced.
- Each side moves up through the field and then down, so the induced e.m.f. reverses every half turn – it is alternating.
- Each end of the coil is connected to a slip ring; carbon brushes press on the rings and carry the current to the external circuit.
- In a rotating-magnet generator (e.g. a bicycle dynamo, power station alternators) the magnet turns inside fixed coils, so no slip rings are needed.
2The e.m.f.–time graph
| Coil position | e.m.f. | Why |
|---|---|---|
| plane of coil parallel to the field | maximum (peak or trough) | sides cut the field lines at the greatest rate |
| plane of coil perpendicular to the field | zero | sides move along the field lines, not cutting them |
One complete turn gives one complete cycle of the sine-shaped graph. Turning the coil faster increases both the peak e.m.f. and the frequency.
3Exam focus
Key words: rotating coil; slip rings; brushes; alternating e.m.f.; maximum when coil parallel to field; zero when perpendicular.
Quick self-check
Answer in your head first, then reveal.
Connect the rotating coil to the external circuit (1); without the wires twisting (1).
Coil perpendicular to the field (1); sides not cutting field lines (1).
Higher peaks (1); more cycles per second / higher frequency (1).
