Detailed · Deep study
1Good and bad conductors
Thermal conduction is the transfer of thermal energy through a material without the material itself moving. Metals are good thermal conductors; non-metals such as plastic, wood, glass and air are bad conductors (thermal insulators).
Practical
Comparing thermal conductors
Aim. To compare how well different materials conduct thermal energy.
Method
- Fix small pins with wax at equal distances along rods of the same length and thickness made of different materials.
- Heat one end of each rod equally (e.g. with the rods arranged around one flame, or dipped in hot water).
- Time how long it takes for the pins to drop, or note how far along each rod the wax melts.
| independent variable | material |
|---|---|
| dependent variable | time for wax to melt / distance |
| controlled variable | rod length and thickness; heating |
Results. Pins fall soonest and furthest along the best conductor (copper), then aluminium and iron; glass conducts very little.
Safety. Hot rods – use heat-proof mats and do not touch.
Another demonstration: heat water at the top of a test tube with ice weighted at the bottom – the water boils but the ice does not melt, showing that water is a poor conductor.
2Explaining conduction (Supplement)
- All solids – lattice vibrations: particles at the hot end vibrate more strongly and pass energy to their neighbours, which pass it on along the lattice. This is slow.
- Metals – free electrons: metals also contain free (delocalised) electrons. At the hot end they gain kinetic energy, move quickly through the metal and collide with particles far away, transferring energy rapidly. This is why metals are good conductors.
- Gases and most liquids: the particles are far apart (gases) or not in a lattice, so collisions that pass on energy are rare – conduction is bad.
- Many solids (e.g. brick, concrete, glass) conduct better than insulators such as foam or air but less well than metals.
3Exam focus
Key words: good conductor; insulator; lattice vibrations; free (delocalised) electrons; particles far apart.
Quick self-check
Answer in your head first, then reveal.
Rods of same size with wax / pins along them (1); heat one end of each equally (1); wax melts / pins fall sooner on copper (1).
Free / delocalised electrons (1); gain energy and move quickly through the metal, transferring energy (1).
Particles are far apart (1); few collisions to pass on energy (1).
