2.2.2

Topic 9

Specific heat capacity

  • IGCSE Physics 0625
  • 2 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Know that a rise in the temperature of an object increases its internal energy

Supplement

  1. 2

    Describe an increase in temperature of an object in terms of an increase in the average kinetic energies of all of the particles in the object

  2. 3

    Define specific heat capacity as the energy required per unit mass per unit temperature increase; recall and use the equation

  3. 4

    Describe experiments to measure the specific heat capacity of a solid and a liquid

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 2.2.2 Specific heat capacity (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Internal energy

The internal energy of an object is the total energy of its particles. When the temperature of an object rises, its internal energy increases.

2Specific heat capacity (Supplement)

Specific heat capacity Syllabus definition

the energy required per unit mass per unit temperature increase

Units: J/(kg °C) (or J/(kg K)). Water has a very high specific heat capacity (4200 J/(kg °C)): it takes a lot of energy to warm up and releases a lot as it cools, which is why it is used in central heating and car cooling systems.

Worked example

Heating water

How much energy is needed to heat 2.0 kg of water from 20 °C to 80 °C? (c = 4200 J/(kg °C))

  1. 1

    Temperature rise.

  2. 2

    ΔE = mcΔθ.

Answer5.0 × 10⁵ J (504 kJ)

Fig. 1Measuring the specific heat capacity of a solid.

Practical

Specific heat capacity of a solid (aluminium block)

Aim. To measure the specific heat capacity of aluminium.

Method

  1. Measure the mass m of the block. Insulate it to reduce energy losses.
  2. Put a heater and a thermometer (with a drop of water or oil for good contact) in the holes. Record the starting temperature.
  3. Switch on for a measured time (e.g. 10 minutes); record the energy supplied from a joulemeter, or calculate ΔE = IVt from ammeter and voltmeter readings.
  4. Record the highest temperature reached; find Δθ.
independent variableenergy supplied
dependent variabletemperature rise
controlled variablemass of block; insulation

Results. Calculate c = ΔE ÷ (m Δθ). The value is usually too high because some energy is lost to the surroundings.

Safety. The heater and block become hot – do not touch them.

For a liquid (e.g. water): put a known mass of the liquid in an insulated container (e.g. a polystyrene cup), heat it with an immersion heater, stir, and measure ΔE and Δθ in the same way.

3Exam focus

Key words: internal energy; average kinetic energy of particles; energy per unit mass per unit temperature increase; ΔE = mcΔθ; insulation; energy losses.

Quick self-check

Answer in your head first, then reveal.

  1. It increases (1).

  2. 36 000 ÷ (2.0 × 40) (1) = 450 J/(kg °C) (1).

  3. Energy is lost to the surroundings (1); so less energy heats the block / temperature rise smaller than expected (1).

Finished this subtopic? Track it on your subject page.