3.4

Topic 13

Sound

  • IGCSE Physics 0625
  • 3 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Describe the production of sound by vibrating sources

  2. 2

    Describe the longitudinal nature of sound waves

  3. 3

    State the approximate range of frequencies audible to humans as 20 Hz to 20 000 Hz

  4. 4

    Know that a medium is needed to transmit sound waves

  5. 5

    Know that the speed of sound in air is approximately 330–350 m / s

  6. 6

    Describe a method involving a measurement of distance and time for determining the speed of sound in air

  7. 7

    Describe how changes in amplitude and frequency affect the loudness and pitch of sound waves

  8. 8

    Describe an echo as the reflection of sound waves

  9. 9

    Define ultrasound as sound with a frequency higher than 20 kHz

Supplement

  1. 10

    Describe compression and rarefaction

  2. 11

    Know that, in general, sound travels faster in solids than in liquids and faster in liquids than in gases

  3. 12

    Describe the uses of ultrasound in non-destructive testing of materials, medical scanning of soft tissue and sonar including calculation of depth or distance from time and wave speed

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 3.4 Sound (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Producing and transmitting sound

Sound is produced by vibrating objects – a guitar string, a loudspeaker cone, vocal cords. The vibrations push and pull on the particles of the medium, sending a longitudinal wave through it.

Fig. 1Sound is a longitudinal wave (B).

Sound needs a medium (solid, liquid or gas). In the bell-jar experiment, an electric bell ringing inside a jar becomes quieter as the air is pumped out – the hammer can still be seen moving – showing that sound cannot travel through a vacuum.

2Frequency range and speed

The approximate range of frequencies audible to humans is 20 Hz to 20 000 Hz (20 kHz). This range shrinks with age.

The speed of sound in air is approximately 330–350 m/s.

Fig. 2Measuring the speed of sound.

Practical

Speed of sound in air

Aim. To measure the speed of sound in air using distance and time.

Method

  1. Measure a distance of at least 100 m (e.g. 400 m) across an open field with a trundle wheel.
  2. One person makes a loud sound that can also be seen, e.g. bangs two blocks together above the head.
  3. A second person starts a stop-watch on seeing the action and stops it on hearing the sound.
  4. Repeat several times and average; swap positions to cancel the effect of wind.
independent variable–
dependent variabletime delay
controlled variabledistance; same observers

Results. speed = distance ÷ average time; typical result about 330–350 m/s.

Worked example

Echo

A student claps 85 m from a large wall and hears the echo 0.50 s later. Calculate the speed of sound.

  1. 1

    The sound travels to the wall and back.

    distance

  2. 2

    speed = distance ÷ time.

Answer340 m/s

3Loudness, pitch, echoes and ultrasound

Fig. 3Oscilloscope traces.
  • Larger amplitude → louder sound.
  • Higher frequency → higher pitch.
  • An echo is the reflection of sound waves from a hard surface.
  • Ultrasound is sound with a frequency higher than 20 kHz – too high for humans to hear.

Worked example

Sonar

(Supplement) A sonar pulse returns 0.80 s after being sent. Sound travels at 1500 m/s in sea water. How deep is the sea?

  1. 1

    Total distance travelled.

  2. 2

    Halve it (there and back).

Answer600 m

4Exam focus

Key words: vibrating source; longitudinal; medium needed; 20 Hz to 20 000 Hz; 330–350 m/s; amplitude → loudness; frequency → pitch; echo = reflection; ultrasound > 20 kHz; compression; rarefaction; time ÷ 2 for echoes.

Quick self-check

Answer in your head first, then reveal.

  1. Space is a vacuum / has no particles (1); sound needs a medium (1).

  2. 20 Hz to 20 000 Hz (1).

  3. Amplitude / height increases (1); frequency / number of waves unchanged (1).

  4. Measure a large distance (1); time from seeing the action to hearing the sound (1); speed = distance ÷ time (1).

  5. Ultrasound pulse sent into the metal (1); reflected from the crack (1); time of echo shows the position of the crack (1).

Finished this subtopic? Track it on your subject page.