1.1

Topic 1

Physical quantities and measurement techniques

  • IGCSE Physics 0625
  • 4 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Describe the use of rulers and measuring cylinders to find a length or a volume

  2. 2

    Describe how to measure a variety of time intervals using clocks and digital timers

  3. 3

    Determine an average value for a small distance and for a short interval of time by measuring multiples (including the period of oscillation of a pendulum)

Supplement

  1. 4

    Understand that a scalar quantity has magnitude (size) only and that a vector quantity has magnitude and direction

  2. 5

    Know that the following quantities are scalars: distance, speed, time, mass, energy and temperature

  3. 6

    Know that the following quantities are vectors: force, weight, velocity, acceleration, momentum, electric field strength and gravitational field strength

  4. 7

    Determine, by calculation or graphically, the resultant of two vectors at right angles, limited to forces or velocities only

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 1.1 Physical quantities and measurement techniques (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Measuring length and volume

A ruler (metre rule) measures lengths to the nearest millimetre. Place it alongside the object, read the positions of both ends, and subtract. Keep your eye directly above the mark (at right angles to the scale) to avoid a parallax error.

Fig. 1Reading a ruler and a measuring cylinder.

A measuring cylinder measures the volume of a liquid. Water forms a curved surface, the meniscus; read the scale at the bottom of the meniscus, with your eye level with it. Volumes are in cm³ (1 cm³ = 1 ml).

Irregular solid (displacement): half-fill a measuring cylinder with water and note the reading, lower the object in gently, and read again. The volume of the object equals the rise in the water level.

Worked example

Volume by displacement

The water level in a measuring cylinder rises from 42 cm³ to 57 cm³ when a stone is lowered in. What is the volume of the stone?

  1. 1

    Subtract the readings.

Answer15 cm³

2Measuring time intervals

  • Clocks and stop-watches measure longer times (seconds to hours). A hand-operated stop-watch reads to 0.01 s, but human reaction time (about 0.1–0.3 s) limits its accuracy.
  • Digital timers with light gates start and stop automatically when an object breaks a light beam, so they are better for short time intervals.
  • Repeat the measurement and calculate the average to reduce the effect of random errors.

3Measuring multiples

Small distances and short times are hard to measure accurately in one go. Measure a multiple of the quantity and divide by the number.

Fig. 2Measuring the period of a pendulum.
  • Thickness of a sheet of paper: measure the thickness of a stack of 200 sheets with a ruler and divide by 200.
  • Diameter of a thin wire: wind 20 close turns around a pencil, measure the width of the coil and divide by 20.
  • Period of a pendulum: time 20 complete oscillations, starting and stopping as the bob passes a fiducial marker at the lowest point, and divide by 20.
Period

the time taken for one complete oscillation

Worked example

Average from multiples

A pendulum makes 20 complete oscillations in 31.6 s. Calculate its period.

  1. 1

    Divide the total time by the number of oscillations.

Answer1.58 s

4Scalars and vectors (Supplement)

  • A scalar quantity has magnitude (size) only.
  • A vector quantity has magnitude and direction.
Scalars (magnitude only)Vectors (magnitude and direction)
distanceforce (including weight)
speedvelocity
timeacceleration
massmomentum
energyelectric field strength
temperaturegravitational field strength

Two vectors acting at right angles combine into a single resultant. Draw them tip to tail: the resultant runs from the start of the first to the end of the second.

Fig. 3Finding a resultant by calculation or by scale drawing.

Worked example

Resultant velocity

A boat is steered across a river at 3.0 m/s while the current carries it downstream at 1.5 m/s. Find its resultant velocity.

  1. 1

    Size, by Pythagoras.

  2. 2

    Direction, measured from the steering direction.

Answer3.4 m/s at 27° downstream of the steering direction

5Exam focus

Key words: both ends of the ruler; eye at right angles / level with the meniscus; parallax; displacement; reaction time; average; measure multiples; period; scalar – magnitude only; vector – magnitude and direction; resultant; tip to tail.

Quick self-check

Answer in your head first, then reveal.

  1. Partly fill a measuring cylinder with water and record the volume (1); lower the stone in and record the new volume (1); volume of stone = difference (1).

  2. Time 20 (or more) oscillations and divide by the number (1); repeat and average (1).

  3. No (human) reaction time (1).

  4. Scalar has magnitude only, vector has magnitude and direction (1); e.g. mass / speed (1); force / velocity (1).

  5. (1) = 10 N (1).

Finished this subtopic? Track it on your subject page.