Detailed · Deep study
1Series circuits
- The current is the same at every point in a series circuit.
- The combined e.m.f. of cells in series is the sum of their e.m.f.s (if they all point the same way): three 1.5 V cells give 4.5 V.
- The combined resistance of resistors in series is the sum:
Worked example
Series circuit
A 6.0 V battery is connected to a 4.0 Ω and an 8.0 Ω resistor in series. Find the current.
- 1
Total resistance.
- 2
I = V ÷ R.
Answer0.50 A
2Parallel circuits
- The current from the source is larger than the current in each branch.
- The combined resistance of two resistors in parallel is less than that of either resistor by itself – adding a branch gives the current another path.
Advantages of parallel lighting circuits: each lamp has the full supply p.d. (so it is fully bright); lamps can be switched on and off independently; if one lamp fails, the others still work.
3Calculations (Supplement)
- At a junction, the sum of the currents entering = the sum of the currents leaving. Charge is conserved: it cannot pile up or disappear at a junction.
- In series, the total p.d. across the components = the sum of the individual p.d.s.
- In parallel, the p.d. across each branch is the same as the p.d. across the whole arrangement.
Worked example
Parallel resistors
(Supplement) Find the combined resistance of 6.0 Ω and 3.0 Ω in parallel, and the current from a 6.0 V cell connected across them.
- 1
1/R = 1/6 + 1/3.
- 2
I = V ÷ R.
(2.0 A + 1.0 A in the branches)
Answer2.0 Ω; 3.0 A
4Exam focus
Key words: same current in series; e.m.f.s add; R = R₁ + R₂; parallel – larger total current, smaller combined resistance; junction rule; p.d.s add in series; same p.d. in parallel.
Quick self-check
Answer in your head first, then reveal.
30 Ω (1).
Each has full mains p.d. / full brightness (1); can be switched independently / others stay on if one fails (1).
1.1 − 0.3 = 0.8 A (1).
1/R = 1/10 + 1/10 (1); R = 5.0 Ω (1).
