1.8

Topic 8

Pressure

  • IGCSE Physics 0625
  • 2 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Define pressure as force per unit area; recall and use the equation

  2. 2

    Describe how pressure varies with force and area in the context of everyday examples

  3. 3

    Describe, qualitatively, how the pressure beneath the surface of a liquid changes with depth and density of the liquid

Supplement

  1. 4

    Recall and use the equation for the change in pressure beneath the surface of a liquid

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 1.8 Pressure (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Pressure

Pressure Syllabus definition

force per unit area

Pressure is measured in pascals (Pa): 1 Pa = 1 N/m². Areas may be given in cm²: 1 m² = 10 000 cm².

Worked example

Pressure under a block

A box of weight 600 N rests on a base of area 0.20 m². Calculate the pressure on the floor.

  1. 1

    Apply p = F/A.

Answer3000 Pa

ExampleAreaEffect
sharp knife, drawing pin, stiletto heelvery smalllarge pressure: cuts or sinks in
snowshoes, wide tractor tyres, camel's feetlargesmall pressure: does not sink into soft ground
foundations of a buildinglargespreads the weight so the building does not sink

2Pressure in liquids

Fig. 1Water jets from holes at different depths.
  • Pressure in a liquid increases with depth – the deeper you go, the greater the weight of liquid above.
  • At the same depth, pressure is greater in a denser liquid.
  • Pressure at a given depth acts equally in all directions.
  • Examples: dams are thicker at the bottom; divers feel greater pressure the deeper they go; water tanks are placed high to give a greater pressure in the pipes.

Calculating pressure change (Supplement)

Worked example

Pressure on a diver

Find the extra pressure on a diver 25 m below the surface of sea water (density 1030 kg/m³, g = 9.8 N/kg).

  1. 1

    Apply Δp = ρgΔh.

Answerabout 2.5 × 10⁵ Pa (in addition to atmospheric pressure)

3Exam focus

Key words: force per unit area; pascal; smaller area, larger pressure; increases with depth; increases with density; Δp = ρgΔh.

Quick self-check

Answer in your head first, then reveal.

  1. Force per unit area (1).

  2. 700 ÷ 0.014 (1) = 50 000 Pa (1).

  3. Pressure in water increases with depth (1); so the force on the bottom of the dam is greater (1).

  4. 800 × 9.8 × 0.50 (1) = 3900 Pa (1).

Finished this subtopic? Track it on your subject page.