4.3.3

Topic 16

Action and use of circuit components

  • IGCSE Physics 0625
  • 1 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Know that the p.d. across an electrical conductor increases as its resistance increases for a constant current

Supplement

  1. 2

    Describe the action of a variable potential divider

  2. 3

    Recall and use the equation for two resistors used as a potential divider

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 4.3.3 Action and use of circuit components (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1P.d. and resistance

For a constant current, the p.d. across a conductor increases as its resistance increases, because . In a series circuit, the largest resistor has the largest share of the p.d.

2The potential divider (Supplement)

Fig. 1A potential divider with an LDR.

A potential divider is two resistors (or a variable resistor with a sliding contact) in series across a supply. The supply p.d. is shared between them, and an output p.d. is taken across one of them. Moving the sliding contact of a variable potential divider changes the output from zero up to the full supply p.d.

Worked example

Potential divider

A 9.0 V supply is connected across R₁ = 2.0 kΩ and R₂ = 1.0 kΩ in series. Find the p.d. across R₂.

  1. 1

    The p.d. is shared in the ratio 2 : 1.

Answer3.0 V

With a thermistor or LDR as one resistor, the output p.d. changes with temperature or light – used to switch on heaters, alarms or lights automatically.

3Exam focus

Key words: p.d. increases with resistance for constant current; potential divider; R₁/R₂ = V₁/V₂; sensor; output p.d.

Quick self-check

Answer in your head first, then reveal.

  1. 20 Ω (1); same current, V = IR so larger R gives larger V (1).

  2. LDR resistance falls (1); so its share of the p.d. / V_out falls (1).

Finished this subtopic? Track it on your subject page.