1.5.1

Topic 5

Effects of forces

  • IGCSE Physics 0625
  • 4 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Know that forces may produce changes in the size and shape of an object

  2. 2

    Sketch, plot and interpret load–extension graphs for an elastic solid and describe the associated experimental procedures

  3. 3

    Determine the resultant of two or more forces acting along the same straight line

  4. 4

    Know that an object either remains at rest or continues in a straight line at constant speed unless acted on by a resultant force

  5. 5

    State that a resultant force may change the velocity of an object by changing its direction of motion or its speed

  6. 6

    Describe solid friction as the force between two surfaces that may impede motion and produce heating

  7. 7

    Know that friction (drag) acts on an object moving through a liquid

  8. 8

    Know that friction (drag) acts on an object moving through a gas (e.g. air resistance)

Supplement

  1. 9

    Define the spring constant as force per unit extension; recall and use the equation

  2. 10

    Define and use the term ‘limit of proportionality’ for a load–extension graph and identify this point on the graph (an understanding of the elastic limit is not required)

  3. 11

    Recall and use the equation and know that the force and the acceleration are in the same direction

  4. 12

    Describe, qualitatively, motion in a circular path due to a force perpendicular to the motion as:

    • aspeed increases if force increases, with mass and radius constant
    • bradius decreases if force increases, with mass and speed constant
    • can increased mass requires an increased force to keep speed and radius constant ( is not required)

Cambridge IGCSE Physics 0625 syllabus 2026-2028, 1.5.1 Effects of forces (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Forces change shape: stretching

Forces can change the size and shape of an object. An elastic solid such as a spring stretches when a load is hung on it and returns to its original length when the load is removed.

Fig. 1Investigating a spring.

Practical

Load–extension graph for a spring

Aim. To find how the extension of a spring depends on the load.

Method

  1. Hang the spring from a clamp stand beside a vertical metre rule and record the length with no load (the original length).
  2. Add a 1.0 N weight, wait for the spring to stop moving, and record the new length. Read the rule at eye level.
  3. Repeat, adding 1.0 N at a time. Calculate extension = new length − original length.
  4. Plot extension against load.
independent variableload (force)
dependent variableextension
controlled variablesame spring; measure from the same point each time

Results. Up to a certain load the graph is a straight line through the origin: extension is directly proportional to load.

Safety. Wear eye protection and keep feet clear in case the spring or weights fall.

Spring constant and limit of proportionality (Supplement)

Spring constant Syllabus definition

force per unit extension

Units: N/m (or N/cm). A stiffer spring has a larger . The limit of proportionality is the point on the load–extension graph beyond which the line is no longer straight – extension is no longer proportional to load.

Worked example

Spring constant

A spring extends by 4.0 cm when a 6.0 N load is hung on it. Find k, and the extension for a 9.0 N load (within the limit of proportionality).

  1. 1

    k = F ÷ x.

  2. 2

    x = F ÷ k.

Answer150 N/m; 6.0 cm

2Resultant force and motion

When several forces act along the same straight line, the resultant force is found by adding forces in the same direction and subtracting forces in opposite directions.

Worked example

Resultant along a line

A car's engine provides a forward force of 3000 N; friction and air resistance total 1800 N backwards. Find the resultant force.

  1. 1

    Subtract the opposing forces.

    forwards

Answer1200 N forwards

  • If there is no resultant force, an object remains at rest or continues in a straight line at constant speed.
  • A resultant force changes the object's velocity – it can speed it up, slow it down, or change its direction of motion.

Worked example

F = ma

(Supplement) A resultant force of 1200 N acts on a car of mass 800 kg. Calculate its acceleration.

  1. 1

    Rearrange F = ma.

Answer1.5 m/s² forwards

3Friction and drag

  • Solid friction is the force between two surfaces that may impede motion and produce heating (e.g. brakes warm up).
  • Drag (a form of friction) acts on an object moving through a liquid (e.g. a boat, a swimmer).
  • Drag also acts on an object moving through a gas – air resistance. Drag increases with speed.

4Motion in a circle (Supplement)

Fig. 2A force towards the centre.

An object moving in a circle is constantly changing direction, so its velocity changes even at constant speed. This needs a force perpendicular to the motion, directed towards the centre (e.g. the tension in a string, friction on car tyres, gravity on a satellite).

  • speed increases if the force increases (mass and radius constant)
  • radius decreases if the force increases (mass and speed constant)
  • an increased mass requires an increased force to keep speed and radius constant

5Exam focus

Key words: change size and shape; extension; load–extension graph; limit of proportionality; spring constant – force per unit extension; resultant force; remains at rest or constant velocity; friction produces heating; drag; F = ma; force towards the centre.

Quick self-check

Answer in your head first, then reveal.

  1. Measure original length with a rule (1); add loads in steps and measure new length each time (1); extension = new length − original length (1).

  2. 8 N (1) to the right (1).

  3. Change its speed (1); change its direction (1).

  4. 40 × 0.15 (1) = 6.0 N (1).

  5. 0.50 × 3.0 (1) = 1.5 N (1).

  6. Towards the centre of the Earth / of the circle (1).

Finished this subtopic? Track it on your subject page.