Detailed · Deep study
1Ores and the reactivity series
An ore is a rock containing enough of a metal compound to make extraction worthwhile. Extraction is a reduction – the metal compound loses oxygen (or the metal ions gain electrons). The more reactive the metal, the more strongly it holds on to its compound and the harder it is to extract.
| Metals | Method | Reason |
|---|---|---|
| K, Na, Ca, Mg, Al | electrolysis of molten ore | too reactive to be reduced by carbon; electrolysis uses a lot of electricity |
| Zn, Fe, (Pb), Cu | reduction with carbon (coke) in a furnace | below carbon in the series, so carbon can remove the oxygen |
| Ag, Au | found as the uncombined metal | so unreactive they do not form compounds easily |
2Extraction of iron in the blast furnace
The raw materials are hematite (iron ore, mainly iron(III) oxide, Fe₂O₃), coke (almost pure carbon), limestone (calcium carbonate) and hot air.
- Coke burns in the hot air, providing heat and producing carbon dioxide.
- The carbon dioxide is reduced by more hot coke to carbon monoxide.
- The carbon monoxide reduces the iron(III) oxide to iron. The molten iron runs to the bottom.
- Limestone decomposes in the heat to calcium oxide and carbon dioxide.
- Calcium oxide (a basic oxide) reacts with silicon dioxide (sand, an acidic impurity) to form slag – calcium silicate. The molten slag floats on the iron and both are tapped off separately.
Symbol equations (Supplement)
| Stage | Equation |
|---|---|
| (a) coke burns | |
| (b) carbon monoxide forms | |
| (c) iron(III) oxide reduced | |
| (d) limestone decomposes | |
| (e) slag forms |
3Extraction of aluminium
The main ore of aluminium is bauxite (impure aluminium oxide). Aluminium is above carbon in the reactivity series, so it is extracted by electrolysis. This uses a great deal of electricity, which is why recycling aluminium is so valuable.
Details of the electrolysis (Supplement)
- Electrolyte: purified aluminium oxide dissolved in molten cryolite. Aluminium oxide melts at over 2000 °C; dissolving it in cryolite lowers the operating temperature to about 950 °C, saving energy and cost, and the molten mixture conducts better.
- Cathode (−): carbon lining of the cell. Aluminium ions are reduced: . Molten aluminium collects at the bottom and is tapped off.
- Anode (+): large carbon blocks. Oxide ions are oxidised: .
- Why the anodes are replaced: at the high temperature, the oxygen produced reacts with the carbon anodes, forming carbon dioxide (), so the anodes burn away.
4Exam focus
Key words: ore; reduction; above / below carbon; hematite; coke; limestone; carbon monoxide reduces iron(III) oxide; slag; bauxite; electrolysis; cryolite lowers the melting point; anodes burn away.
Quick self-check
Answer in your head first, then reveal.
Aluminium is above carbon in the reactivity series so carbon cannot reduce its oxide (1); iron is below carbon (1).
Carbon monoxide (1).
Decomposes to calcium oxide (1); which reacts with silicon dioxide / sand impurity (1); to form slag (1).
(2).
Cryolite lowers the melting point / operating temperature, saving energy (1); oxygen forms at the anodes (1); reacts with the carbon to form carbon dioxide, so anodes burn away (1).
(1).
