10.1

Topic 17

Water

  • IGCSE Chemistry 0620
  • 2 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Describe chemical tests for the presence of water using anhydrous cobalt(II) chloride and anhydrous copper(II) sulfate

  2. 2

    Describe how to test for the purity of water using melting point and boiling point

  3. 3

    Explain that distilled water is used in practical chemistry rather than tap water because it contains fewer chemical impurities

  4. 4

    State that water from natural sources may contain substances, including:

    • adissolved oxygen
    • bmetal compounds
    • cplastics
    • dsewage
    • eharmful microbes
    • fnitrates from fertilisers
    • gphosphates from fertilisers and detergents
  5. 5

    State that some of these substances are beneficial, including:

    • adissolved oxygen for aquatic life
    • bsome metal compounds provide essential minerals for life
  6. 6

    State that some of these substances are potentially harmful, including the following (details of the eutrophication process are not required):

    • asome metal compounds are toxic
    • bsome plastics harm aquatic life
    • csewage contains harmful microbes which cause disease
    • dnitrates and phosphates lead to deoxygenation of water and damage to aquatic life
  7. 7

    Describe the treatment of the domestic water supply in terms of:

    • asedimentation and filtration to remove solids
    • buse of carbon to remove tastes and odours
    • cchlorination to kill microbes

Cambridge IGCSE Chemistry 0620 syllabus 2026-2028, 10.1 Water (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Testing for water and its purity

TestPositive result for water
anhydrous copper(II) sulfatewhite → blue
anhydrous cobalt(II) chloride (e.g. on paper)blue → pink

To test purity, measure the melting point and boiling point. Pure water melts at exactly 0 °C and boils at exactly 100 °C (at standard pressure). Dissolved impurities lower the melting point and raise the boiling point, and make them occur over a range of temperatures.

Distilled water is used in practical chemistry rather than tap water because it contains fewer chemical impurities (such as dissolved salts and chlorine) that could react with or contaminate the substances being tested.

See Topic 12 · Preparation of SaltsPurity and melting/boiling points: 12.4.

2Substances in natural water

Water from rivers, lakes and underground sources is never pure. It may contain:

Substance in natural waterBeneficial or harmful?
dissolved oxygenbeneficial – needed by aquatic life
metal compoundssome provide essential minerals; some (e.g. lead, mercury compounds) are toxic
plasticsharmful – some harm aquatic life
sewageharmful – contains microbes that cause disease
harmful microbesharmful – cause disease (e.g. cholera)
nitrates (from fertilisers)harmful – lead to deoxygenation of water and damage to aquatic life
phosphates (from fertilisers and detergents)harmful – lead to deoxygenation of water and damage to aquatic life

Nitrates and phosphates from fertilisers wash into rivers and lakes and cause rapid growth of algae. When the algae die, bacteria decompose them and use up the dissolved oxygen, so fish and other aquatic organisms die. (Details of this eutrophication process are not required.)

3Treatment of the water supply

Fig. 1Stages of water treatment.
StagePurpose
sedimentationlarge insoluble particles settle to the bottom
filtration (through sand and gravel)removes smaller insoluble solid particles
carbon (activated charcoal)removes tastes and odours
chlorinationkills microbes (bacteria) so the water is safe to drink

4Exam focus

Key words: white to blue; blue to pink; melts at 0 °C, boils at 100 °C; fewer chemical impurities; dissolved oxygen; toxic; deoxygenation; sedimentation; filtration; carbon; chlorination.

Quick self-check

Answer in your head first, then reveal.

  1. Add anhydrous copper(II) sulfate (1); turns from white to blue (1). (Or cobalt(II) chloride, blue to pink.)

  2. Measure the boiling point (1); pure water boils at 100 °C (or melts at 0 °C) (1).

  3. It contains fewer (chemical) impurities than tap water (1).

  4. (a) removes (insoluble) solids (1) (b) kills microbes (1).

  5. They lead to deoxygenation of the water (1); damaging / killing aquatic life (1).

Finished this subtopic? Track it on your subject page.