11.6

Topic 18

Alcohols

  • IGCSE Chemistry 0620
  • 2 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Describe the manufacture of ethanol by:

    • afermentation of aqueous glucose at 25–35 °C in the presence of yeast and in the absence of oxygen
    • bcatalytic addition of steam to ethene at 300 °C and 6000 kPa / 60 atm in the presence of an acid catalyst
  2. 2

    Describe the combustion of ethanol

  3. 3

    State the uses of ethanol as:

    • aa solvent
    • ba fuel

Supplement

  1. 4

    Describe the advantages and disadvantages of the manufacture of ethanol by:

    • afermentation
    • bcatalytic addition of steam to ethene

Cambridge IGCSE Chemistry 0620 syllabus 2026-2028, 11.6 Alcohols (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Manufacture of ethanol

Ethanol, C₂H₅OH, is made industrially in two ways.

Fermentation

Yeast is added to an aqueous solution of glucose (from sugar or starch). Enzymes in the yeast convert the glucose to ethanol and carbon dioxide.

  • Temperature 25–35 °C: warm enough for a reasonable rate; higher temperatures denature the yeast enzymes.
  • Absence of oxygen: with oxygen, the yeast respires aerobically and produces carbon dioxide and water (or the ethanol is oxidised to ethanoic acid).
  • The ethanol is separated from the mixture by fractional distillation.

Catalytic addition of steam to ethene

Ethene (from cracking) and steam are passed over an acid catalyst (phosphoric acid) at 300 °C and 6000 kPa / 60 atm.

See Topic 11 · Acids and BasesThis is an addition reaction of an alkene (11.5).

2Combustion and uses

Ethanol burns in air with a pale blue flame, releasing a lot of energy. Complete combustion gives carbon dioxide and water:

  • Solvent: dissolves many substances that do not dissolve in water – used in perfumes, inks, medicines and cleaning products.
  • Fuel: used in spirit burners, and mixed with petrol as a car fuel; it can be made from renewable crops.

3Comparing the two methods (Supplement)

FermentationCatalytic addition of steam to ethene
Raw materialglucose from crops (sugar cane, maize) – renewableethene from cracking petroleum – non-renewable
Conditions25–35 °C, yeast, no oxygen; low energy use300 °C, 60 atm, acid catalyst; high energy use
Rateslow (days)fast
Process typebatchcontinuous
Purity of productimpure (about 15% ethanol) – needs fractional distillationpure ethanol
Other pointsuses land that could grow food; CO₂ producedhigh yield; equipment costly

4Exam focus

Key words: fermentation; yeast; 25–35 °C; absence of oxygen; steam; acid catalyst; 300 °C; 60 atm; solvent; fuel; renewable / non-renewable.

Quick self-check

Answer in your head first, then reveal.

  1. Yeast (1); 25–35 °C (1); absence of oxygen (1).

  2. (2).

  3. Solvent (1); fuel (1).

  4. Advantage: renewable raw material / low temperature, less energy (1). Disadvantage: slow / batch / impure product needing distillation (1).

Finished this subtopic? Track it on your subject page.