11.3

Topic 18

Fuels

  • IGCSE Chemistry 0620
  • 2 min read
  • Syllabus 2026, 2027 and 2028

Core

  1. 1

    Name the fossil fuels: coal, natural gas and petroleum

  2. 2

    Name methane as the main constituent of natural gas

  3. 3

    State that hydrocarbons are compounds that contain hydrogen and carbon only

  4. 4

    State that petroleum is a mixture of hydrocarbons

  5. 5

    Describe the separation of petroleum into useful fractions by fractional distillation

  6. 6

    Describe how the properties of fractions obtained from petroleum change from the bottom to the top of the fractionating column, limited to:

    • adecreasing chain length
    • bhigher volatility
    • clower boiling points
    • dlower viscosity
  7. 7

    Name the uses of the fractions as:

    • arefinery gas fraction for gas used in heating and cooking
    • bgasoline / petrol fraction for fuel used in cars
    • cnaphtha fraction as a chemical feedstock
    • dkerosene / paraffin fraction for jet fuel
    • ediesel oil / gas oil fraction for fuel used in diesel engines
    • ffuel oil fraction for fuel used in ships and home heating systems
    • glubricating oil fraction for lubricants, waxes and polishes
    • hbitumen fraction for making roads

Cambridge IGCSE Chemistry 0620 syllabus 2026-2028, 11.3 Fuels (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Fossil fuels and hydrocarbons

The fossil fuels are coal, natural gas and petroleum (crude oil). They formed over millions of years from the remains of ancient organisms and are non-renewable. Natural gas is mainly methane, CH₄.

Hydrocarbon Syllabus definition

a compound that contains hydrogen and carbon only

Petroleum is a mixture of hydrocarbons with different chain lengths. It is not very useful until separated into fractions.

2Fractional distillation of petroleum

Fig. 1The fractionating column.
  1. Petroleum is heated so that most of it vaporises, and the vapour passes into the bottom of a fractionating column.
  2. The column is hot at the bottom and cooler at the top.
  3. As the vapours rise, they cool. Each fraction condenses at the height where the temperature falls below its boiling point and is drawn off.
  4. Small molecules with low boiling points rise to the top (refinery gas); large molecules with high boiling points stay near the bottom (bitumen).

3Properties and uses of the fractions

Going up the column (bottom → top)Change
chain lengthdecreases (fewer carbon atoms)
volatilityhigher (evaporate more easily)
boiling pointlower
viscositylower (runnier)
Fraction (top → bottom)Use
refinery gasgas for heating and cooking
gasoline / petrolfuel for cars
naphthachemical feedstock (making other chemicals)
kerosene / paraffinjet fuel
diesel oil / gas oilfuel for diesel engines
fuel oilfuel for ships and home heating systems
lubricating oillubricants, waxes and polishes
bitumenmaking roads

4Exam focus

Key words: coal, natural gas, petroleum; methane; hydrogen and carbon only; mixture of hydrocarbons; fractional distillation; decreasing chain length, higher volatility, lower boiling point, lower viscosity up the column.

Quick self-check

Answer in your head first, then reveal.

  1. A compound containing hydrogen and carbon only (1).

  2. Methane (1).

  3. Boiling point decreases (1); viscosity decreases (1).

  4. (a) jet fuel (1) (b) making roads (1).

  5. Vapour rises and cools (1); fractions condense at different heights according to their boiling points (1).

Finished this subtopic? Track it on your subject page.