2.1

Topic 2

Types and methods of data transmission

  • IGCSE Computer science 0478
  • 3 min read
  • Syllabus 2026, 2027 and 2028

Objectives

  1. 1

    • aUnderstand that data is broken down into packets to be transmitted
    • bDescribe the structure of a packet
    • cDescribe the process of packet switching
  2. 2

    • aDescribe how data is transmitted from one device to another using different methods of data transmission
    • bExplain the suitability of each method of data transmission, for a given scenario
  3. 3

    Understand the universal serial bus (USB) interface and explain how it is used to transmit data

Cambridge IGCSE Computer Science 0478 syllabus 2026-2028, 2.1 Types and methods of data transmission (copied for internal use as permitted by Cambridge)

Detailed · Deep study

1Packets and packet switching

Fig. 1Header, payload and trailer.

Data sent over a network is broken down into small, equal-sized packets. Each has a header (destination address, packet number, originator's address), a payload (the data) and a trailer (marks the end of the packet; may include an error check).

Fig. 2Routers choose the route for each packet.
  1. Data is broken down into packets.
  2. Each packet could take a different route; a router at each step decides where to send it next.
  3. Packets may arrive out of order.
  4. Once the last packet has arrived, the packets are reordered using their packet numbers, and the original data is rebuilt.

Benefits: packets avoid busy or broken links, so the network is used efficiently; only lost packets need to be resent. Drawback: packets can be delayed or lost and need reordering.

2Methods of data transmission

Fig. 3Serial and parallel.
Fig. 4Direction of transmission.
MethodHowAdvantagesDisadvantagesExample use
serialone bit at a time down a single wirecheaper; works over long distances; no skewingslower than parallel over short distancesUSB, internet connections
parallelseveral bits at the same time down several wiresfaster over short distancesbits can arrive out of sync (skew) over long distances; more expensive cablinginside a computer (data bus)
simplexone direction onlysimple, cheapno reply possiblecomputer to printer, TV broadcast
half-duplexboth directions, one at a timetwo-way using one channelslower: devices must take turnswalkie-talkies
full-duplexboth directions at the same timefastest two-way communicationneeds more channels/bandwidthphone calls, broadband

3The universal serial bus (USB)

USB is a standard serial interface for connecting devices such as keyboards, printers, phones and memory sticks. When a device is plugged in, the computer detects it and loads the right driver automatically.

BenefitsDrawbacks
devices are detected automatically (plug and play)maximum cable length is short (a few metres)
one standard connector for many devices; can only be inserted one way (most types)older USB versions have slower transfer speeds
supplies power to devices and can charge themdifferent connector types (A, B, C, micro) can be confusing
fast data transfer in newer versions

4Exam focus

Key words: packet; header; payload; trailer; packet switching; router; serial; parallel; simplex; half-duplex; full-duplex; skew; USB.

Quick self-check

Answer in your head first, then reveal.

  1. Destination address (1); packet number (1); originator's address (1).

  2. Data split into packets (1); packets may take different routes (1); router decides the route (1); packets reordered at destination (1).

  3. Distance is long (1); parallel bits may skew / serial is cheaper and more reliable (1).

  4. Full-duplex (1).

  5. Any two: automatic detection; supplies power; standard connector; fast (2).

Finished this subtopic? Track it on your subject page.